Sarasota Radon and mold inspector

Residential and Commercial South Florida Mold Testing
By A Certified Inspector
Professional, Detailed, Non-Bias Reports
No conflict of interest; we inspect only!!!
Post Remediation Clearance Testing
Professional Spore Analysis
Remediation Protocol
MEMBER:
Indoor Air Quality Association member
and American Indoor Air Quality Council
AmIAQC, CIE # 01952
1 (888) 381-6651

ECOTECH Environmental Consultants (Mold Inspection South Florida)

http://www.moldtestingflorida.com

Certified Indoor Environmentalists
Mold Inspections & Testing
Thermal Imaging
Complete Air / water Quality testing

Toll Free
800 801 1727

(561) 249-4204 * (305) 677-0078 *(407) 459-4822 *(954) 931-6212

"Many Mold inspection companies only perform "Mold Testing". Mold testing should not be confused with a Mold Inspection. Mold testing refers to collecting air or surface samples which are analyzed by a laboratory, this procedure will only determine the mold spore count and spore identification. This process will not help determine what caused the problem, the source or the solution to it; but is very helpful when performed in conjunction with a full inspection."

Infrared Consultants

Infrared Consultants Corporate Office
9180 Estero Park Commons Blvd. #6,
Estero, Florida 33928.

Tel: (239) 596-2888
Toll-Free: (866) 575-4277

http://www.infraredconsultants.com/residential-services.html

"It is important to choose a firm based on their experience and education. We emphasize objective, solutions-based approaches focused on identifying the cause and extent of mold contamination and appropriate remediation strategies. All of our practices are consistent with industry guidelines by the American Conference of Governmental Industrial Hygienists, the American Industrial Hygiene Association, the Environmental Protection Agency, the New York City Department of Health, and the International Institute of Inspection, Cleaning, and Restoration S500 & S520 standard."

"Written reports are designed specifically for issues requiring stringent documentation and include inspection summaries, photographic documentation, moisture survey results & interpretations, microbial sampling & environmental monitoring results, risk assessments, and remediation guidance."

NAME CHANGE NOTICE

Clean Air Inspections is no longer answnering their old phone numbers. We often refer clients to them, when our schedule does not permit us to help.

Sorry for any misleading information.

Infrared Consultants and Clean Air Inspections are the same.

their contact information is listed above.

Indoor Air Quality Management

SERVING THE ENTIRE COUNTRY

The experts at IAQM can assist you with all of your indoor air quality issues.

Call us toll-free:1.888.385.IAQM / 1.888.385.4276

COLE'S Air Diagnostics

Air Flow Problem Solving Our Speciality

Michael E. Lyon, CIE
Engineering, Diagnostics, IAQ

Office: (239) 277-7296

Email: mike.lyon@coleair.com

Website: www.coleair.com

American Indoor Air Quality Council Board Certified Indoor Environmentalist

Real Estate Mold Assessment (Inspection)

Lab analysis for Real Estate mold assessment normally identifies molds to the genus level.

If you need lab analysis reports that identify molds to the "species" level for your Real Estate contract requirements; please let your inspector know when you order the inspection. Species identification for Real Estate mold assessment is unusual and expensive; requires either DNA analysis or a viable sample to be grown in a lab for several days.

Has your buyer walked because of a Home Inspectors "elevated mold" test report?

EPA

Considering Bioaerosol Sampling

http://www.epa.gov/mold/moldcourse/chapter7/lesson2.html

"remember that a negative sampling report must not be used in place of a visual survey. Factors such as barometric pressure, inside and outside temperatures, activity levels, and humidity may dramatically reduce or increase the spore levels within a building. Air sampling for mold provides information on what was in the air only for the moment when the sampling occurred. It is important, therefore, that sampling not replace visual inspection."